Miller Specialty Tool Kit # 9988

Miller Tool Kit 9988Miller Tool Kit 9988
Description

Product ID #05-200-065

Tools to service the 186FIA Front Axles in Jeep Liberty and Dodge Nitro Vehicles. Front bushing service tools for Dodge Nitro vehicles. Also Arbor Discs for the 194FIA axles and G288 manual transmissions.

Manufacturer: Miller / OTC / Chrysler

Components: 6927A, 8681, 8805, 8806, 8926, 9959, 9956, 9957, 9969, D-348

PRICE: $404.61

Hybrid Vehicle Operation and Diagnostics Training
meets OSHA training; best hybrid diagnostics available

Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
 

Component photos courtesy Miller Tool Company

Read the IMPORTANT INFORMATION in the right sidebar.

# D-348 Dummy Bearing Set - Dana 30/35

Use these dummy bearings to properly set preload and backlash in vehicles equipped with the 185FBI front axles.

miller special tool d-348 dummy bearing set

# 6927A Arbor Disc Set

These Arbor discs are used with Kit numbers 6730, 6770, 6774, 6777, 6775, 6776 to set proper Pinion Height on Dana Model 194FIA Front Axles from 1997 to 2002. Also used with the vehicles equipped with the 226RBA Axles through current model year.

Miller Tool 6927A

# 8681 Seal Installer

This installer is used with the C-4171 Drive Handle to install the 2WD Pinion Seal to its proper depth in the 186FIA Front Axles. Also used on the 216RBI Rear Axles to current model year.

Miller Tool 8681

# 8805 Bearing Installer

This special tool is used with the C-4171 Drive Handle to install the Axle Bearing into its housing of the 186FIA Front Axles in Jeep Liberty vehicles. NOTE: May be stored in your Jeep Axle Tool Box. Services to current model year vehicl;es.

Miller Tool 8805

# 8806 Seal Installer

Use this special tool with the C-4171 Drive Handle to install the Axle Seal into 186FIA Front Axles in Jeep Liberty vehicles. Services to current model year vehicl;es.

Miller Tool 8806

# 8928 Bearing Collets

These Collets are used with pieces from the 5048 Puller to remove the Differential Bearings from the case in G288 Manual Transmissions. Services to current model year vehicl;es.

Miller Tool 8926

#9956 Clevis Bracket Remover

This special tool is used with the C-4212F and 9653-1 to remove the Clevis Bracket Bushings on the Dodge Nitro vehicle.

Miller Tool 9956

# 9957 Seal Installer

This special tool is used to install the Encoder Oil Seal in the MP3010 Transfer Case.

Miller Tool 9957

# 9959 Adapter Plates

These Adapter Plates are used with the W-129-B to service the 186FIA Front Axles in Dodge Nitro vehicle.

Miller Tool 9959

#9969 Bushing Installer

This special tool is used with the C-4212F and 9603-1 to install the Lower Control Arm Bushings on the Dodge Nitro vehicle.

Miller Tool 9969

view cart button  

       IMPORTANT INFORMATION

Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.

Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.

For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.

  • SRT-10 pickup truck rear axle service tools

    Miller Tool 9341

  • differential service tools for crossfire , lx and others using 198 & 

210 rear axles

    Miller Tool 9518 1-5

  • LX vehicles w/ AWD differential service tools

    Miller Tool 9674

  • American axles w/ electric lock 9.25 & 10.5 inch axles service 

tools

    Miller Tool 9690

  • tools to service 186FIA & 186FBI axles

    Miller Tool 10089

  • rear axle / differential service tools

    Miller Tool 10145

  • AWD differential and transfer case service tools

    Miller Tool 10175

More Miller Differential tools!

     New Products