Miller Specialty Tool Kit # 8999

Component photos courtesy Miller Tool Company

Read the IMPORTANT INFORMATION in the right sidebar.

# 8513A Crankshaft Insert

Use this special Crankshaft Insert in conjunction with the 8454 Puller to remove the Crankshaft Damper from the new 5.7 Liter Hemi Engine.

NOTE: This tool supercedes the original 8513 tool and may be used on the 3.7 Liter and 4.7 Liter Engines with the 8454 puller. Services to current model year vehicles.

# 9039 Seal Installer

Use this special tool along with the 6310 to install the new style replacement inner axle seals into trucks equipped with the Dana Model 248FBI Front Axles. Services to current model year vehicles.

# 9065A Valve Spring Compressor

Use this tool to remove or install the Valve springs on vehicles equipped with the 5.7 Liter Hemi Engine. Tool includes the 9065-3. Services to current model year vehicles.

# 9070 Push Rod Retainer

This plate must be used while installing the Intake side Rocker Shaft Assembly in vehicles equipped with the 5.7 Liter Hemi Engine. Services to current model year vehicles.

# 9071 Seal Remover

Use this tool to remove the Front Crankshaft Seal from the Timing Cover on vehicles equipped with the 5.7 Liter Hemi Engine. Services to current model year vehicles.

# 9072 Seal Installer

This tool must be used to prevent damage while installing the Front Crankshaft Seal into its housing on vehicles equipped with the 5.7 Liter Hemi Engine. Services to current model year vehicles.