Miller Specialty Tool Kit # 9692 Box 4 of 4
Product ID #05-200-053
Tools to properly service the G56 Manual Transmissions in Gasoline and Diesel powered vehicles during service procedures.
Manufacturer: Miller / OTC / Chrysler
Components: 9593, 9605, 9598, 9597, 9589
meets OSHA training; best hybrid diagnostics available
Misfire Code and Fuel Monitor Diagnostics
learrn the professional shortcuts and eliminate comebacks
Component photos courtesy Miller Tool Company
Read the IMPORTANT INFORMATION in the right sidebar.
# 9589 Bearing Cup Installer
This special tool is used along with the C-4171 Drive Handle to install the Countershaft Bearing Cup in the G56 Transmission. Countershaft and Mainshaft End play during service procedures on the G56 Transmission.
# 9593 Bearing Cup Remover
This special tool is used along with the 8915 Brace to remove the Countershaft and Mainshaft Bearing Cups from the Rear Housing in the G56 Transmission.
# 9597 Bearing Remover
Use this special tool with the 6444 Puller to to remove the Countershaft Bearing in the G56 Transmission.
# 9598 Seal Installer
This tool is used to install the Output Shaft Seal in the G56 Transmission on Diesel powered vehicles only.
# 9605 Fixture
This special fixture is used to hold the Mainshaft in G56 Transmissions during service procedures.
IMPORTANT INFORMATION
Our OEM tool distributors have granted us access to some of their repossessed tools inventories. These are the same idential tools supplied to the captive manufacturer's dealer. Since they are mostly repossessed tools do expect cosmetic damage (eg: minor wear, surface conditions). You will be rewarded with 30 to 60 percent off retail prices, most kits include the carry / storage case.
Some of these kits are rather heavy, so the shipping charges (48 states, USA only) will be co-oped by the distributor with a single flat rate shipping price to you on each kit.
For shipments outside of the 48 states USA contact us for accurate co-oped shipping charges.
-
Miller Tool 9691 1-2
-
Miller Tool 9691 2-2
-
Miller Tool 9692 1-4
-
Miller Tool 9898
-
Miller Tool 9960
-
Miller Tool 10017 1-2
-
Miller Tool 10017 2-2
